Filter ADAFs¶
-
class
node_filter_adafs.
FilterADAFsWithPlot
[source]¶ Filter ADAFs with a specified filter.
Both IIR filters and FIR filters can be selected. The filter can be a forward or forward-backward filter. The resulting filter design and an example of filtered data can be inspected in real-time within the node’s GUI.
- The FIR filter windows that can be used are:
- The IIR filter functions supported are:
Inputs: - port1 : [adaf]
Input ADAFs
Outputs: - port1 : [adaf]
Output ADAFs with filter applied
Configuration: - Filter type
Combo of filter types
- Frequency pass type
Frequency pass type required for the FIR filter.
- Filter windows
Filter windows for FIR filter
- Filter length
Length of the filter
- Cutoff frequency
Cutoff frequency of filter (expressed in the same units as nyq) OR an array of cutoff frequencies (that is, band edges). In the latter case, the frequencies in cutoff should be positive and monotonically increasing between 0 and nyq. The values 0 and nyq must not be included in cutoff.
- Beta
Filter specific parameter. Check the help.
- Sigma
Filter specific parameter. Check the help.
- Filter designs
IIR filters
- Passband edge frequency
Passband edge frequency
- Stopband edge frequency
Stopband edge frequency
- Max loss in passband (dB)
Max loss in the passband (dB)
- Min attenuation in stopband (dB)
Min attenuation in the stopband (dB)
- Filtering
Filtering types
- Select Signal
Select a signal
- Auto refresh
Automatically refresh the plot